9 ‘Actually Different' Ways To Hide Your Air Conditioner In Your Yard

If you have an ugly, and probably noisy, air conditioning unit in your garden, yard or deck, there are many ways to cover or hide it.I've done some research and compiled 9 ‘actually different' approaches you can pick and choose to stop your unit bugging you.

Although there are numerous variations – from the cheap to the very expensive – most fall within these categories:

• Timber/Artificial Screens
• Trellis/Lattice(With or Without Plants)
• Timber Cabinets
• Planting Around It(Hedges, Screening Plants or Garden Beds)
• Raised Garden Beds
• Soundproof/Acoustic Fences
• Solid Walls– Brick, Concrete Block or Rammed Earth
• Layers Of Solid Barriers With Plantings
• Water Features(To Reduce The Noise!)

Your best option depends on where your air conditioning unit is and how much time and money you want to contribute to ‘solving' the problem.

I've got another post that looks at an example ofhow to "blend" an air conditioning unit into a spacedown the side of the house.It's useful because it forces you to think beyond just the ‘solution' to a problem.

Speaking of solutions, most sources I looked at showed essentially the same way to "hide an AC unit" 20 different times.I want to do a little better.

Although each of the categories I mentioned above does a similar thing – block something visually – I think they also add a little nuance and can fit into different situations in different ways.

Materials, combinations of materials and the layout of elements all contribute to not just hiding an air conditioning unit from site, but hopefully reduce their noise as well.

Before we explore the options, let's have a quick look at one important thing you need to keep in mind.

What To Consider When Hiding Your Air Conditioning Unit In Your Yard

Given their specific spacing and air flow requirements, you need to think about the following:

• Does your air conditioning unit havespacing requirementsto ensure safe operation?
• Are thereairflow requirementsfor it to function efficiently?
• What kind ofnoiseandheatdoes it create when in use?
• Are there anymaterialsor such it says youshouldn'tplace around it?
• How often/likely are you to requireaccessto it (bearing in mind you shouldalways leave some way to access it)?
• Finally, could you potentiallyvoid warrantyif you don't provide adequate (minimum recommended) space around it?

This last point iscritical.

DO NOT build anything permanent, or even make access or repair workdifficult, if the manufacturer could use it as an excuse torejecta warranty claim.

Although unlikely, for some other utility types, the owner or manufacturer could order/require you toremoveordestroythe work you've done so they can access the point when they need to.

The last thing you want to do is reduce the unitsefficiency, or void anywarrantythrough damaging the unit (yourself or the repairer).If you're unsure,more spaceandairflowis probably better.

Add as much space as you think you can get away with.

Now let's have a look at a few materials and building options you have for hiding or covering your air conditioning unit.

1.Hiding AC Units With Timber Or Artificial Screens

Straightforward and easy to build or install, screens can wrap around and/or above the unit, successfully hiding it from view.

There are many approaches you could take, starting with afolding screenplaced in front of or around the unit.

You could go with something like a basicbamboo or woven screenif you wanted to wrap around the space as well.

For something more permanent, a simpletimber slat screencan sit around it.Ensure you leave enough airflow and space around any fan forced units so they continue to run efficiently.

Or if you want to put in a little more effort, you could try something like the well known cover byhouse-pet.blogspot.com.A great ‘syncopated' style where the gaps and timber slats are of unequal lengths, making it more visually engaging.

2.Place Trellises/Lattice Screens Around Units – With Or Without Plants

Like the timber slat screen above, you can build something morepermanentaround the unit and pop somelatticein the frame.Then you can choose to leave it as a basic, well ventilated fence, or add some climbing plants to it to cover it a little more.

A variation on this idea is to have a basic timber screen orlatticeandhang small pot plantsfrom it.These could climb up or flow down the frame, and allow you to mix and match multiple colours and shapes.

3.Covering Air Conditioning Units With Timber Cabinets

Another common strategy is to incorporate the cover for the unit into something larger, like a large set ofcabinets.

One space can contain the unit – with suitable airflow and space – while the other can be a closet or shelves for storage.

Here is another slightly different example – where the owner opted for atablestructure over the air conditioning unit.

4.Plant Around The AC Unit – Hedges, Screening Plants Or Garden Beds

Forgo frames altogether and opt to plant somehedges, screening plants or even layers of plantsaround the utility unit.

If you have enough space you could have lovely garden beds that don't just hide the unit from view, butbecome attractive features of their own.The image below shows this approach done somewhat poorly.The unit is out of view, but the plants aren't part of something grander.

This image shows amuch better approach, where the garden bed takes centre stage and it a thing unto itself – not just a cover.

If you can't plant directly into the ground, somepot plantsmay allow you to provide enough coverage to obscure it effectively.It may also prevent unwanted spreading of roots that could potentially cause damage, especially if the unit has elements underground.

Just be sure youpruneand otherwisemaintain your plantsso they don't block or interfere with the units operation.And provide enough space so you can maintain the unit and the plants.

5.Surround Your Aircon Unit With Raised Garden Beds

Depending on where you are in the world you could opt to build someraised garden bedsaround the aircon unit to grow produce in.

You could place some taller trellises at the back near the utility unit so your vegetables or herbs could grow up them, adding more coverage – and maybe taking advantage of cooling breezes.

This approach would require more consideration as raised bedsaren't cheap to installproperly.And you want to ensure any excess heat produced by the utility doesn'tdamage your vegetables.

But, if it had enough sun and/or protection, you could turn that dead space into something far moreuseful.And maybe even take advantage of any warmth in the area during colder months.

6.Try Soundproof / Acoustic Fences To Dampen The AC Unit's Noise

This is a less common option, but may beperfectfor you if the unit can benoisy.Just like your screens above, you could install soundproof fences around the unit.

If you install them correctly (with no gaps beneath or between walls and uprights) they shouldblock a large proportionof the noise the unit produces.

You will need to ensuresuitable airflow, so keep the top open and have a reasonable gap between the unit and the fence.You also need to maintain access to the unit, so you could leave one side open and fill with grasses or small shrubs, or add a gate.

The image above is from a great selection of images byflorida-soundproofing.comshowing a soundproof wall being installed around an air conditioning unit.

What I also like is it shows how close the unit was to the entertaining area, making this particular material a perfect solution toreducingthose noise levels.

7.Hide The Unit Behind Solid Walls – Brick, Concrete Block Or Even Rammed Earth

Following a similar layout to the acoustic fence above – the wall is offset, no roof, there is still access – you could opt to build apermanent wall around the unit.

Depending on your colour and material palette, you could usebrick,concrete blocks(known as CMU's) or even something unique likerammed earth.

Now this may seem a little overkill, but, as you'll see in thispost(also mentioned at the top), you caninclude this approach as part of a larger design.

And that design might allow you to look beyond a basic solution – to cover an aircon unit – and explorehow to make the space somewhere you'd like to spend time.

If that is something you could do, it might be worth spending the money and using such heavy materials – because they arepart of the framework of something bigger(but achieve another purpose – hiding the utility – at the same time).

8.Cover The Air Conditioning Unit By Layering Solid Barriers With Plantings

You don't need to rely onjustone of the options I outlined above.In fact, it may be better to pair a few together.

If sound is an issue,add a solid layerof some kind – even a basic timber fence –with some plantings around it.Don't have any gaps (other than an access point in) and your solid wall with plants will do wonders in reducing noise.

Not only that, but you can extend the planting ‘look' into other spaces, so they aren't just a screen for something, but a garden bed in their own right.

9.Use A Water Feature To Mask The AC Unit's Noise

Stealing from myblocking road noise guide, if noise is an issue, try to drown out some frequencies using awater feature.

Water bubbling and tinkling does a great jobcounteracting some of the mid to high frequencies air conditioning units can produce.If your unit sits near your entertaining space (or on your deck) the water feature can create a more pleasant atmosphere than the whining fan.

So you can see there areplentyof ways tohide,coverorminimise noiseof a utility unit like an air conditioning unit.

But as I've intimated a few times, the key in successfully hiding something is to expand your solutionbeyondthe immediate area.So when you look at the space as a whole, you're hard pressed toseeanyutility exists there at all.

I hope you found this useful.Please post your thoughts, ideas and success stories below!